ABS codes c1223 c1251 c1252c1253 c1254 c1256 Toyota 4Runner

Home Forums Repair Kits 00 – 05 4Runner GX470 ABS Pump ABS codes c1223 c1251 c1252c1253 c1254 c1256 Toyota 4Runner

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #1961
    bobby*K*
    Guest

    Hi, I have a 3rd gen 4runner and it has the codes c1223 c1251 c1252 c1253 c1254 c1256 and I am wondering if the replacment motor MOT-54550916 will fix my problem or if i would need to buy the complete unit you offer ?

    #1963
    david killer
    Keymaster

    Good morning ,
    code definitions
    C 1223 abs control sys malfunction
    C 1251 pump motor locked in open circuit position
    C 1252 hydro booster pump motor
    C 1253 hydro booster pump motor relay
    C 1254 pressure sensor or switch
    C 1256 accumulator has low pressure.
    I always recommend to clear the codes and see which ones come back, all the codes however are related
    c1223 sets when the modual recognizes a problem and “shuts down” the abs unit
    c1251 “open circuit” means an incomplete circuit(bad or wore out brushes,fuses,wiring or burnt out motor) directly related to the boost pump motor
    c1252,c1253 telling you there is a problem with the booster pump motor
    c1254,c1256 are telling you the system is low on preassure that is essentially built up by the booster pump motor and nitrogen accumulator
    the end result is a simple yes …I would change the motor out and it should solve your problem(s) !

    #1964
    bobby*K*
    Guest

    Thanks for the quick reply
    I have some mechanical experience ,is it something I can change out on my own?

    #1965
    david killer
    Keymaster

    The replacment motor comes with step by step instructions for DIY including pictures and bleed procedure ,We also offer full phone support so if you have any questions during; there is always someone that can guide you In all honesty there is a minimal skill level needed to replace it -We also have a small list of mechanics accross the USA that have already completed this swap and once you buy it I can look through the list and see if one is close enough to you

    #1966
    bobby*K*
    Guest

    ok, sounds good
    Thanks for the help

    #1971
    bobby*K*
    Guest

    hey just wanted to let you know i got it last night and I’m good to go ,everything worked out and the lights are off with a good strong brake ,now off to my in laws for thanksgiving – happy holiday and g-d bless you guys I really do appreciate all the help!!!!!!!

    #1977
    david killer
    Keymaster

    No problem ,glad I was able to help

    #2627
    Jon
    Guest

    Hey What all did you get to fix this? Having the same problem! Please help

Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.